ROAM D-SERIES

FREERIDE FOIL BOARD / SURF

Roam D-Series


FREERIDE FOIL BOARD / SURF

Using a carefully selected mix of Dacron and ripstop, we have created a super light yet rugged 3-strut air frame.

Although the Roam’s design remains familiar in Gen 3, the kite’s flying weight has been greatly reduced (weighing-in lighter than most single strut kites), improving its performance not just in light wind, but in all wind conditions.

The ultra light weight and deep foil profile in combination with a moderate arc provide for sharp, responsive turns, maximum drift, and the low-end hover sought out when freeride foiling, or drifting down-the-line on your surfboard.

With the Roam Gen 3, there is no longer a need to compromise on stability and wind range in favour of no struts.

Sizes 5, 6, 7, 8, 9, 10, 12

$1,069.00 USD

60 Day Guarantee

We’ll help you find the best fit until you’re satisfied within, and if not, it’s your money back.

Extended Warranty

Register your kite, board, bar, or drysuit online to receive an extra 6 months of warranty coverage.

BuyBack Program

Trade in any kite from any brand that’s up to 24 months old, and receive up to 50% off the purchase of a new kite.

ATTRIBUTES

 

SIZE (M)

 

567891012
WEIGHT (KG)2.152.252.352.652.702.853.15

SIZE (M)

5

6

7

8

9

10

12

WEIGHT (KG)

2.15

2.25

2.35

2.65

2.7

2.85

3.15

STRUCTURE


SHAPE


Built for the dedicated wave rider with a moderate arc makes the roam a fast turning kite combined with a large sheeting range.


RATIO


The Roam’s low aspect ratio design and deep foil profile allow for maximum drift and low end power.

3 STRUT FRAME


The Roam’s 3 strut “boxy” frame results in its big lifting wingtips allowing the kite to effortlessly drift down the line while maintaining positive steering with tight pivot turns for ultra fast changes of direction.


The entire frame is built with tested and proven KP-E dacron providing incredible strength, durability, and rigidity. Where our competition choose to reinforce their closing seams with only mark cloth, we use more KP-E because we believe reinforcement materials should be at least as strong as its base.


BRIDLES


A fixed short line bridle with a floating V design and a two pulley system creates direct and snappy response while also keeping bar pressure low. New to this generation are larks head loops on front bridles, and knots on the back lines making for an innovative system that stabilizes the leading edge. This allows the Roam to lift out of a loop and avoiding a stall for maximum climb.


SAFETY SYSTEM


A single front line flag out system is used allowing the rider to achieve maximum de-power if the trim loop release is activated..


WARNING! It is crucial that the bar you are using utilizes this system. 


Note: For Next Gen kites we have changed the bridles on our kites so that the front attachments have loops and the back attachments have knots.


In order to use a previous generation Ocean Rodeo bar with a Next Gen kite, you must first install the OR Bar Bridle Adapter Kit (which can be purchased from a dealer or directly from Ocean Rodeo) to the bridles on the kite. This will change the bridles so that the front attachments have knots and the back attachments have loops. Thus making it compatible with the older model bars. 


MATERIALS

CHALLENGE D2.9 RS DACRON


Designed specifically to combat the loads in an inflatable leading edge kite. This material has been shown to hold a kite’s shape better and longer than others by over 60%. We use warp oriented constructions using Ultra High tenacity yarns with an increased thread count to combat elongation in the warp direction under high inflation pressures. Lower elongation makes for a more accurate kite with less deformation while in flight.


TEIJIN TECHNO FORCE D2 RIPSTOP


Designed specifically for the kiteboarding market, Teijin’s Technoforce D2 Ripstop has high tear resistance, low stretch, and is incredibly light weight.


Each Strand of yarn is individually coated before being woven together. A second surface coating is then applied to the material, providing long term endurance.


Teijin D2 is the benchmark in quality with proven superiority in durability and dynamics.

FEATURES

PRECISION CURVE STRUTS


Curved struts hold the designed foil shape delivering the desired performance through the wind range.


ARMORTEX® ABRASION GUARD


Ultra-light, non fraying, and abrasion resistant, these Kevlar/ nylon blend scuff protection pads deliver a streamlined no snag profile throughout the kite.


ULTRA LITE CONSTRUCTION


We use a blend of state of the art fabrics and components in order to bring to you the lightest and toughest kites we’ve ever made. Using custom blended UV film in our strut and leading edge bladders allows us to double down on light weight with outstanding durability.


SPEED INFLATION SYSTEM


Direct hose to valve connection for simple operation. Wide threaded cap is easy to tighten and even easier to unscrew eliminating the jammed valve cap syndrome. Cap is leashed to the kite, and the valve cover has been re-shaped for smooth no snag fit.


HIGH CAPACITY VALVE


Ultra-light, non fraying, and abrasion resistant, these Kevlar/ nylon blend scuff protection pads deliver a streamlined no snag profile throughout the kite.


LOAD DISTRIBUTION


15 years of kite design and manufacturing has taught us more than a few tricks about using strategic seam placement to reduce the stress points between the trailing edge and the canopy. This combined with load distributing reinforcement patches enhance the kite’s performance and durability.


VARIABLE LINE LENGTH


Tailor your kite’s performance to match your riding style and launch conditions. Longer lines generate more power while shorter lines increase speed and response. Ultra-short lines provide immediate rider feedback to the kite and a direct, snappy feel with added advantage of simplified line management at tricky launching and landing sites.


TRIM EQUALIZER


Keeps line lengths equal when fine tuning kite turning speed.


BUCK STITCHING


This three stage zig-zag stitch, combined with 10mm tape, distributes the seam load and creates a tear resistant, long lasting seam.


EASY ACCESS BLADDER PORT


Easy to locate and perfectly balanced to hold your kite in place while you pump.


SECURE CONNECT


Molded beads on the back line leaders deliver a secure larks head connection every time.


Quick connect front line connector loops in high-vis orange allow for easy line management.


SECURE PUMP LEASH LOOP


Easy to locate and perfectly balanced to hold your kite in place while you pump.

PRECISION CURVE STRUTS


Curved struts hold the designed foil shape delivering the desired performance through the wind range.

ARMORTEX® ABRASION GUARD


Ultra-light, non fraying, and abrasion resistant, these Kevlar/ nylon blend scuff protection pads deliver a streamlined no snag profile throughout the kite.

ULTRA LITE CONSTRUCTION


We use a blend of state of the art fabrics and components in order to bring to you the lightest and toughest kites we’ve ever made. Using custom blended UV film in our strut and leading edge bladders allows us to double down on light weight with outstanding durability.

SPEED INFLATION SYSTEM


Direct hose to valve connection for simple operation. Wide threaded cap is easy to tighten and even easier to unscrew eliminating the jammed valve cap syndrome. Cap is leashed to the kite, and the valve cover has been re-shaped for smooth no snag fit.

HIGH CAPACITY VALVE


Ultra-light, non fraying, and abrasion resistant, these Kevlar/ nylon blend scuff protection pads deliver a streamlined no snag profile throughout the kite.

LOAD DISTRIBUTION


15 years of kite design and manufacturing has taught us more than a few tricks about using strategic seam placement to reduce the stress points between the trailing edge and the canopy. This combined with load distributing reinforcement patches enhance the kite’s performance and durability.

VARIABLE LINE LENGTH


Tailor your kite’s performance to match your riding style and launch conditions. Longer lines generate more power while shorter lines increase speed and response. Ultra-short lines provide immediate rider feedback to the kite and a direct, snappy feel with added advantage of simplified line management at tricky launching and landing sites.

TRIM EQUALIZER


Keeps line lengths equal when fine tuning kite turning speed.

BUCK STITCHING


This three stage zig-zag stitch, combined with 10mm tape, distributes the seam load and creates a tear resistant, long lasting seam.

EASY ACCESS BLADDER PORT


Easy to locate and perfectly balanced to hold your kite in place while you pump.

SECURE CONNECT


Molded beads on the back line leaders deliver a secure larks head connection every time.


Quick connect front line connector loops in high-vis orange allow for easy line management.

SECURE PUMP LEASH LOOP


Easy to locate and perfectly balanced to hold your kite in place while you pump.

COMBINE WITH THE SHIFT


The Ocean Rodeo Shift Bar truly unlocks the full potential of your next gen kite lineup. This back line trim bar gives the ability to dial in and adjust your trim line without the need to overreach. With Innovate 3’s patented innovative sidewinder nob, the Stick Shift allows for accurate adjustment no matter how rugged the conditions are. Tried and tested on the rugged waters off of Vancouver Island, this bar is built tough with an elegant ease of use.


SHERPA TECH BAG


The Sherpa Kite Bag comes standard with all kites.


We’ve all been there, draping multiple kite bags, pumps and boards over every appendage of our bodies. Fumbling our way through rugged terrain in search of that perfect wave or glassy flat.


The Sherpa system makes it easy to connect and stack an unlimited numbers of kite bags off your back or chest for a perfectly balanced hike in and out.


Free up your hands and arms for effortless climbing. In seconds, stash your board and pump away. Designed for riders who search for the ultimate ride, it’s never been easier to find out what’s around the next headland.


WIND CHART COLOUR MATCHED LABELS.


To make things even easier the Sherpa Kite Bag is colour coded via strategically placed colour coded size labels. Aligned to match wind strength colors used by leading web-based wind forecast websites, with a quick glance you’ll know if you’re grabbing a 17m or 9.5m.


WIND RANGE

TwinTip ~ 75kg / 180lb rider

IMPORTANT NOTICE!


This Wind range chart is for reference only.

Board size, foil size, rider weight, rider skill level and wind / weather / water conditions all must be taken into consideration when selecting a kite size. 

If unsure of which size to select, choose the smaller size.



Surf Board ~ 75kg / 180lb rider

IMPORTANT NOTICE!


This Wind range chart is for reference only.

Board size, foil size, rider weight, rider skill level and wind / weather / water conditions all must be taken into consideration when selecting a kite size. 

If unsure of which size to select, choose the smaller size.



Foil Board ~ 75kg / 180lb rider

IMPORTANT NOTICE!


This Wind range chart is for reference only.

Board size, foil size, rider weight, rider skill level and wind / weather / water conditions all must be taken into consideration when selecting a kite size. 

If unsure of which size to select, choose the smaller size.