WHICH KITE IS RIGHT FOR YOU?

CRAVE HL-SERIES

WAVE / BOOSTING / FREERIDE


ROAM HL-SERIES

FREERIDE FOIL BOARD / SURF


FLITE HL-SERIES

LIGHTWIND FREERIDE


HL-SERIES

HL-SERIES

HYBRID LIGHT = NEXT LEVEL LIGHT WIND PERFORMANCE, WITH AIRFRAME STABILITY BUILT FOR ALL CONDITIONS.


Strategically placed ALUULA composite materials are blended with Dacron to create a new hybrid construction class that delivers decreased weight with improved airframe response. 


ALUULA fabric has been inserted into key overlays and reinforcement panels, while the struts have a full ALUULA panel running from the leading edge to the strut tips. This ALUULA strip is strategically placed to tighten up the airframe flex, providing faster turning and improved stability.


With the HL-Series, we didn’t just stop with the introduction of ALUULA... Every single seam and component was reviewed and improved. If any weight savings could be found, we addressed them with new parts and processes, while at the same time maintaining our 20-year legacy of producing “Built Tough” kites that are designed to be ridden hard.

HL-SERIES FEATURES 

ALUULA ATTRIBUTES

Tensile Strength (Warp / Weft)


Tensile strength is a measurement of the force required to pull something such as rope, wire, or a structural beam to the point where it breaks. 

The lengthwise or longitudinal warp yarns are held stationary in tension on a frame or loom while the transverse weft (sometimes woof) is drawn through and inserted over-and-under the warp.




Moduls (N/mm2)


Modulus of elasticity measures a material’s resistance to being deformed elastically (not permanently) when stress is applied.




Tear Strength (Lbs of force)


Tear resistance (or tear strength) is a measure of how well a material can withstand the effects of tearing.


STRUT TECHNOLOGY

ALUULA STRUT PANELS


ALUULA 82 gsm composite panels run the length of the strut to deliver up to 3 times higher modulus / stretch resistance than industry standard Dacron. The high modulus ALUULA creates a direct connection from your bar inputs to kite turning and sheeting. Synced connectivity between the leading edge and struts is attained by ALUULA Composite gussets. 



PERCISION CURVED STRUTS


The precision curved struts hold the designed foil shape delivering the desired performance through the wind range.



QUAD LOCK SEAMS


Used specifically on the shaping seams of struts, Quad Lock delivers more than twice the strength of standard strut seam constructs, and was another innovation specifically tailored for the ALUULA airframe kites.


LEADING EDGE TECHNOLOGY

ALUULA POWER BAND


A band of ALUULA 82 gsm composite runs from wing tip to wing tip along the connection seam between the canopy and leading edge. With twice the tensile strength of the underlying Dacron leading edge fabric, the ALUULA strip also stiffens the Dacron leading increasing the Modulus (resistance to stretching while under load). Increased stability and handling in all conditions.



ALUULA OVERLAYS


All reinforcement overlays on the leading edge have been upgraded to ALUULA. With the composite's superior tear and puncture resistance, you can be assured that these traditionally "weak points" are now amongst the most enduring parts of your air-frame.


REINFORCED CANOPY

ALUULA REINFORCED


The canopy's reinforcements, overlays and anti-flutter strips now benefit from ALUULA’s remarkable strength to weight ratio and it's superior abrasion resistance compared to  Dacron and other much heavier abrasion solutions.



TEIJIN D2 RIPSTOP CANOPY


Designed specifically for the kiteboarding market, Teijin’s Technoforce D2 ripstop has high tear resistance, low stretch, and is incredibly lightweight.


Each strand of yarn is individually coated before being woven together. A second surface coating is then applied to the material, providing long term endurance.


Teijin D2 is the benchmark in quality with proven superiority in durability and dynamics.


INFLATION SYSTEM

Our ultra clean inflation system is designed for reliable operation of single point inflation. Valves are strategically located to stay clear of the canopy, negating the need for valve covers or other chafing solutions. 


Other refinements are the omission of zippers on the leading edge. These zippers are used only for kite bladder changing, and are one of the primary causes of failure on kite leading edges. Bladders are simply installed though the large valve hole. 


BRIDLE SYSTEM

Highly refined, the compact two pulley bridle is designed for arc stability and no snagging, while at the same time providing direct drive steering and a massive sheeting range. The Bridle is compatible with all bars that feature a single front line flag out emergency de-power system.


Industry standard larks head on LE bridle to front flying line knot or bead. Back lines larks head to bead or knot on kites back line leader. Bridle is designed to accept bars fitted with lines at equal length when set at pull power.


Features ultra strong, low diameter, stretch resistant line for reduced drag and increased response. 

SHERPA TECH BAG

The Sherpa Kite Bag comes standard with all HL-Series kites.


We’ve all been there, draping multiple kite bags, pumps and boards over every appendage of our bodies. Fumbling our way through rugged terrain in search of that perfect wave or glassy flat.

 

The Sherpa system makes it easy to connect and stack an unlimited numbers of kite bags off your back or chest for a perfectly balanced hike in and out.

 

Free up your hands and arms for effortless climbing. In seconds, stash your board and pump away. Designed for riders who search for the ultimate ride, it’s never been easier to find out what’s around the next headland.




To make things even easier the Sherpa Kite Bag is colour coded via strategically placed colour coded size labels. Aligned to match wind strength colours used by leading web-based wind forecast websites, with a quick glance you’ll know if you’re grabbing a 17m or 9.5m.


WHY ALUULA?

A lighter wing means better handling in all conditions.

ALUULA, an ultra-light, ultra-strong and stable composite material not only improves light wind performance, but also increases handling, stability and flying performance in all wind conditions. This makes an ALUULA wing more efficient than a standard wing, performing better in all respects, including improved flex for more reactive pumping, lighter weight for easy hand work and balanced one handed drifting.


Why do you need the lightest wings on the market?


Better for all styles of riding. Downwinders, surf, freestyle and more. With improved response in all conditions, you'll enjoy easier transitions, better light wind and enhanced top end control due to reduced distortion in gusts delivered by the stretch resistant ALUULA.


• Better wind range. Every Ocean Rodeo wing features the full ALUULA strut. Built to withstand 12 psi, this high pressure strut connects your input directly to the leading edge and canopy without delay or distortion.


• Better for travel. When two A-Series wings weigh the same as one traditional wing, it's a no-brainer...carry more gear on your trips with less fear of excess baggage charges.

LEARN HOW USING A LIGHTER KITE WILL IMPROVE YOUR RIDING.

Enter your name and email to get started…

In our three part email series, you’ll find out…

Why a lighter kite means a better ride...

Why opening up the wind range means more time on the water...

How to move your riding forward!

With input from international team riders and our very own founder Richard Myerscough, this 3-part email series explains how lighter kites can be extremely beneficial to your riding, and how they’re going to push the sport of kiteboarding forward dramatically in the coming few years. You’ll also get to find out a little more about the mystical ALUULA material and how, now that the A-Series kites are publicly available, this material is set to change the game as we know it…

OCEAN RODEO

Proudly endorsed by Export Development Canada and Innovation Canada